Na-ion Product Directory

This equipment uses three-phase 380V/50Hz power supply with a rated power of 9kW. It features a single-temperature three-control structure with a temperature control accuracy of ±1°C. It is equipped with a Φ2-420mm K-type thermocouple sensor, with a maximum temperature of 1150°C and a recommended heating rate of 10°C/min. The temperature zone size is Φ150×905mm, and the furnace tube is made of 310S stainless steel with specifications of Φ60×1500mm. The equipment has a lifting angle range of 0-21 degrees, a stroke of 300mm, and a lifting speed of 5mm/s. The screw feeder reduction ratio is 10:1, and the furnace tube rotation reduction ratio is 25:1. Both the inlet and outlet tank volumes and the effective furnace tube volume are 3L. The gas circuit is equipped with a float flowmeter with a range of 0.1-1L/min, a Φ6.35 dual-ferrule connector for the gas inlet, and a Φ8 barb connector for the gas outlet. An overpressure safety valve is provided for automatic pressure relief protection.

Powered by AC380V 50Hz power supply, rated power 13kW, equipped with a Φ2350mm K-type thermocouple sensor; maximum operating temperature 1200°C, long-term operating temperature 1150°C, recommended heating rate not exceeding 10°C/min, single-zone single-control mode, furnace chamber zone dimensions Φ350×420mm; reactor made of Hastelloy C276, dimensions Φ273×585mm, capable of accommodating a 2.3L corundum crucible with specifications Φ165×153mm; gas line equipped with a float flowmeter with a range of 0.3-3L/min, exhaust using an electric ball valve with KF25 interface, vacuum port also of KF25 specification, lifting device with a maximum stroke of 650mm; the complete system includes a glove box and furnace, as well as a glove box electrical control cabinet, with the glove box and furnace dimensions of 3500mm in length.

Power supply: AC380V 50Hz, rated power 25KW, single temperature zone with eight controlled zones, equipped with Φ2420mm K-type thermocouple sensor; maximum equipment temperature 1150°C, long-term operating temperature 1100°C, recommended heating rate not exceeding 10°C/min, furnace temperature zone dimensions Φ1502400mm, including 8 segments of 300mm temperature zones; furnace tilt angle range -1.5° to 5°, equipped with hand-crank screw lifting mechanism, 300 turns corresponding to 1°, furnace tube is a quartz tube with dimples, specifications Φ10032005mm, furnace tube rotation speed continuously adjustable within 0.1-6rpm/min, inlet and outlet material tank volume 5L; gas circuit configured with 2 float flowmeters, measuring ranges 0.3-3L/min and 0.5-8L/min respectively, with matching oxygen analyzer measurement range

This equipment is a vertical tube furnace for high-temperature reduction or oxidation, model NBD-LT1700-60TID3ZY10LW-N, powered by a 380V, 50Hz power supply with a rated power of 10KW and temperature control accuracy of ±1°C. The heating element is silicon-molybdenum rods, equipped with a Φ8150mm Type B thermocouple sensor, with a maximum temperature of 1700°C, a rated operating temperature of 1650°C, and a recommended heating rate not exceeding 10°C/min. The device features a single temperature zone and single control structure, with a zone length of 400mm and a furnace tube made of Φ601100mm corundum. The gas inlet is configured with 3 nitrogen-calibrated mass flow controllers, with carbon monoxide and carbon dioxide inlet flow rates of 500SCCM each, and a nitrogen inlet flow rate of 2000SCCM. The gas inlet uses a Φ6.35 double ferrule, the vacuum port adopts a KF16 interface, and the vacuum pump has a pumping rate of 4L/s.

Power supply voltage: 220V/380V, heating power: 4-16KW, equipped with a selected vane vacuum pump. The ultimate vacuum of the vacuum pump can reach 6.67×10⁻²Pa, the cold-state vacuum of the equipment is 2000Pa, with a vacuum gauge for vacuum measurement, and the gas charging pressure is set to 0.11MPa. The maximum sintering temperature of the equipment can reach 2200℃, using contact-type full-range temperature measurement covering room temperature to 2200℃, with a furnace temperature uniformity of ±5℃, and the heating rate can be adjusted within the range of 1-15℃/min.

Equipment Description: This equipment is a cell backside double-sided tape applicator. It is a standard machine that moves along the X-axis via a linear module. A cylinder drives a suction cup to pick up the tape, and then the mechanical motion designed in the equipment applies the tape onto the cell.

The production line cycle time can reach 12-15 PPM. Based on 300 working days per year, the annual production capacity ranges from 500 MWh to 1 GWh, with a product yield rate of no less than 99%. The equipment overall efficiency (OEE) is calculated by multiplying the availability rate, performance rate, and first-pass yield rate.