Automatic Inlet and Outlet Rotary Furnace (with Atomizer)
Model: NBD-RT1200-60T3D2F2LN
Specifications
This equipment uses three-phase 380V/50Hz power supply with a rated power of 9kW. It features a single-temperature three-control structure with a temperature control accuracy of ±1°C. It is equipped with a Φ2-420mm K-type thermocouple sensor, with a maximum temperature of 1150°C and a recommended heating rate of 10°C/min. The temperature zone size is Φ150×905mm, and the furnace tube is made of 310S stainless steel with specifications of Φ60×1500mm. The equipment has a lifting angle range of 0-21 degrees, a stroke of 300mm, and a lifting speed of 5mm/s. The screw feeder reduction ratio is 10:1, and the furnace tube rotation reduction ratio is 25:1. Both the inlet and outlet tank volumes and the effective furnace tube volume are 3L. The gas circuit is equipped with a float flowmeter with a range of 0.1-1L/min, a Φ6.35 dual-ferrule connector for the gas inlet, and a Φ8 barb connector for the gas outlet. An overpressure safety valve is provided for automatic pressure relief protection.
Description
1. Equipped with an RF admittance level switch automatic feeding and discharging system and a stainless steel pushing screw conveyor, enabling efficient material loading/unloading and real-time level monitoring. 2. Features a self-developed atomization device, providing stable liquid reactants for experiments. 3. Utilizes advanced PID self-learning fuzzy control, achieving high temperature control accuracy within ±1°C. 4. Furnace lining made of high-purity alumina lightweight fiber material, offering superior thermal insulation and energy savings. 5. IoT functionality (WiFi) allows remote monitoring and operation via mobile phone or computer. 6. Data storage function retains key sintering parameters for up to 30 days (based on 8 hours of daily operation). 7. Recipe function supports pre-storing over 20 recipes. 8. Networking capability via RJ45 interface using TCP/IP protocol, enabling connection to an upper computer (requires corresponding software installation).
🔒 Login to view contact info
Login →